skin crystals & diamond microdermabrasion before and after
The Micro-crystal Dermabrasion was designed by Italian
Florence's Mattioli at first, until now had over 20 years
This kind of technology only supplies to the dermatology expert
and doctor at first uses, but more and more SPA House & Beauty
Saloon also gradually uses, it was called the best method of
medical beauty. This method successfully has developed in
Europe for several years, cures patient thousands of examples,
and has obtained the extremely satisfactory effect.
Now we want to introduce the Diamond Dermabrasion, it is a
creative improvement of the Micro-crystal Dermabrasion. The
Diamond Dermabrasion provided a non-surgical skin refinish
procedure, by using sterile diamond heads to abrade or rub off the
top skin layer, then Vacuuming out the particles along with any
and dead skin back up. This procedure removes skin debris,
imperfections, blemishes, wrinkles and unwanted pigmentation on
the skin. Moderate usage of Diamond Dermabrasion, accompany
with skin products that penetrate through top skin layer that reach
the dermis level, helps to replenish natural nutrients, restore
activity, and promote skin health. The results after Micro
Dermabrasion treatment is usually a healthy, glowing, beautiful
2. Operating Instruction for Diamond
1. Before use the machine, please screw out the output nozzle in
the machine, and then check there is one O-ring attached the
nozzle or not, and also check the cotton filter in the nozzle is
or not. We recommend exchange the new cotton filter every
2. Connect the Silicone hose from the output nozzle to the
Diamond Peel pen.
3. Tight up the Diamond Head on the hand piece. Please make
the Diamond Head connects well with the diamond pen, or else
there is one risk to loose pressure.
4. Turn on the power switch.
5. Adjust the Vacuum intensity by Vacuum Regulator according to
the following reference table, the intensity displays on Vacuum
gauge and check with the client for comfort.